Mark
Boss pedal in a rack question
I have 2 Boss pedals in my rack they are both powered by a Boss power supply. When I power on my rack the Boss pedals are in bypass mode and I have to push the pedal on each time. Is there a way to wire these things so that the default power up is ON.
Mark
Mark
# 1
This is a long shot but you could try taping them down, or sticking something to depress the switch under the cover like a small block of wood or something.
My instructors page and www.studiotrax.net for all things recording.
my toons Brought to you by Dr BadGAS
my toons Brought to you by Dr BadGAS
# 2
Well, if you really want to do that, you can open up the pedals and if there are 2 wires going to the switch, you can jumper them together, or if they go to a trace on the board, you can solder a jumper between the two spots on the board. Just use heavy enough wire for the job.
So. If you throw a cat out of a car window, is it considered "kitty litter"?
# 3