View post (Acoustic/Electric Pickup Problem)

View thread

free_refil
New Member
Joined: 08/01/03
Posts: 1
free_refil
New Member
Joined: 08/01/03
Posts: 1
08/01/2003 11:58 pm
Hi, this is my first post, and it's because I have a slight problem on my hands! I started playing acoustic guitar in February, and have since purchased my own guitar, an Acoustic/Electric Applause by Ovation. Well, after some time playing, and playing with other peoples guitars, I noticed that my action seemed really high. I am beginning to learn to fingerpick, and mostly strum with my thumb and stay away from harder picks. So I decided I would adjust my action by fileing down the little bar under the strings on the body of the guitar. So I took my strings off, and went to pull it up, and when I did, little metal plates fell to the ground! There were two metal plates that went the length of the bar, 1 plastic bar that had 6 little metal/plastic rectangle pieces in it (2 of which fell out, but I was able to put them in, thanks to the 4 that were left, I was able to tell which way they went in, as one side was a silver metal plate and the other was a copper/brass/broze metal plate) I had no idea the pickup's were located here, and I didn't know that all this stuff would come apart when I took off the bar, I figured it would be straight forward and I would be able to just file it down on a flat surface with sandpaper. Anyways, there was a U shaped metal piece that wrapped around the bottom-side of the bar, and it had a metal thin plate running down the interior of it, which was connected to a piece of wire going into the guitar. The wire was soldered in such a way that there was a gap between the U and that bar, So I figured that the plastic piece with the 6 little metal/plastic pieces inside it went between the U and the bar. My question is, how does this plastic piece lay inside there? Does the silver side of the 6 metal/plastic pieces face towards the U or the metal bar? Also, the 2 long metal bars do not fit inside the U, so I believe those are the shims which were underneath the U, which I would have had to remove to lower my action. I do not have an amplifier so I cannot plug it up to test the sound, although I have hooked it up to an amp before and it had amazing sound. Thank you for your help!