Question on pickups.


Rammstein2452
Member
Joined: 07/29/00
Posts: 57
Rammstein2452
Member
Joined: 07/29/00
Posts: 57
10/12/2000 1:09 am
Hello. I've got a question for all you guys. I have a nice guitar with pickups that i reall dont know to much about and im thinking about upgrading. I hear the EMG-81's are good but whats with the battery thing? could someone explain a little about pickups for me please. thanks

------------------
RAMMSTEIN RULESSS!!!!!!
Hello me, Meet the REAL me
# 1
jake sommers
High Bandwidth
Joined: 03/09/00
Posts: 442
jake sommers
High Bandwidth
Joined: 03/09/00
Posts: 442
10/12/2000 6:39 am
damn, you read my mind i was gonna post the same thing, i saw it on ebay and was like"why the hell does a pickup need a battery." something that makes it active or something, i really want to know also.
"Take my hand boss"
# 2
trendkillah
Senior Member
Joined: 06/08/00
Posts: 490
trendkillah
Senior Member
Joined: 06/08/00
Posts: 490
10/12/2000 9:12 am
I'm not an expert, but i'll try to explain.

Active pickups in a way are built in pre-amps.
They have a higher output then passive pickups, they need more electric power for that, that's why there is a battery.(those pickups dont use alot of power, the batteries last for about 600 hours)

But that's not the only difference; passive pickups have AC (alternating current), while active pickups have DC (direct current). So it's not possible to make a passive pickup active by attaching a battery.

Also, if you install an active pickup in your guitar, you need to make some adjustments(changing pot-meters, output plug), especially when you don't make the whole wiring active.
It's best to let a tech work on it, cause if you don't know what you're doing, you could ruïn your new pickup.


Greetz, trendkillah


# 3
Jon68
Member
Joined: 08/17/00
Posts: 85
Jon68
Member
Joined: 08/17/00
Posts: 85
10/13/2000 12:06 am
In the beginning there were single-coils. . .
After Oersted demonstrated that an electric current affected a magnetic compass needle in 1820, Faraday concluded that a magnetic field should be able to produce a current. Faraday demonstrated this in 1831. Over the next century came generators, alternators and finally, someone (Rickenbacker maybe?) applied these principles to a guitar pickup.
A single-coil guitar pickup is just that; a spool of many turns of wire wrapped around a series of magnets. The string moving through the magnetic "field" produces a tiny electrical signal, which can be amplified and processed. Single-coil pickups produce a clear, ringing tone, but are susceptible to outside interference. Humbucking pickups use two coils of wire connected so that the noise will be cancelled or reduced. Humbucking pickups also produce a much stronger electrical signal, and a darker, less clear sound than single-coils.
Most guitars use only one or more pickups with "passive" components such as resistors, capacitors and inductors for tone and volume control.
Active pickup systems include a preamplifier circuit and tone shaping circuitry such as equalizers or even effect processors. The active system consists of transistor or operational amplifiers which require a battery for operation (just like your effects pedals). Active systems provide a much stronger signal to your amplifier and allow greater variation in pickup design and placement.

[This message has been edited by Jon68 (edited 10-12-2000).]
# 4

Please register with a free account to post on the forum.