Hey everyone need a little help here. Well our five piece is getting ready for a small gig 200 people. I have some questions. First we are running a Nady XA1100 power amp with a behringer RX1202FX mixer and a pair of Yorkville YSC-10's . Now would you run both guitars and drums along with lead and backing vocals through the YSC 10's . OR would you run the guitars through their own amps(not miced ) and not mic the drums at all and just run the vocals into the YSC-10's . We are using Audix OM2's for mics. The other end of it is the hall we are playing also has a Peavey 600R PA system. I was thinking about micing the guitars and drums through the XA1100 and using the Peavey Pa strictly for vocals. I know the easy solution would be buy some PA mains but at this time it isn't happening. The YSC-10's are placed beside the drums with the guitar amps placed on top of each. It sounds like everything is being muffled when we run everything through the mixer and amp. any help would be appreciated. the last gig we did was outside and we didn't mic the guitars or drums and the vocals sounded great through the YSC-10s/. Would you also place the YSC-10's beside the drums and the PA mains on stands up front off to the sides. thanks in advance.