I'm rewiring my olp to have 2 tone pots. I'm using the original 500k w/ .02uf cap for the humbucker from hell and a new 250k w/ .02uf on my tone zone, to make it warmer. All using >this< diagram (plus a dpdt volume (500k) to split both pups).
I want the grounding done properly, avoiding ground loops. I've read a little on star grounding, and think it makes alot of sense. From what i understand, you bring all grounds to a central point (ie. a washer) and then run only one wire to the output jack. I also understand you unbend the bent lug on the volume jack and run a wire to the central spot.
Another part to the question...The wires that connect the pots together have 2 wires, the connection wire and the ground wire. Do all the ground wires run to the central location as well?
Help with this is greatly appreciated.
eric
For life is quite absurd and death's the final word, You must always face the curtain with a bow
Forget about your sin - give the audience a grin
Enjoy it - it's your last chance anyhow.
METOOB
Forget about your sin - give the audience a grin
Enjoy it - it's your last chance anyhow.
METOOB
