Head to Cab question

i play in a band and the other guitarist just got some 'new' equipment. he got a new head and his cab is fairly new as well. im not sure how to hook it up because it seems (maybe its just the language) different from mine in the back.

the head is a Randall RH200 200W
and the cab is a Behringer BG412S 400W

here's whats on the back of the head
Parallel Load
Mini output:total 4 ohms
there is a lightning bolt between the Mini Output and total 4 ohms part so im guessing since there is an input for each that they are separate in relation to conencting the head to the cab. his cab has the left input/right output, mono stereo jacks. its 8 ohms. im not sure of the language so this is some help to me too i suppose. so how do you hook connect the head and the cab? and in mono or stereo? im assuming he has no intstruction booklets and i dont want to screw it up

thanks

It's a solid state amp, so as long as you don't hook a cabinet up to it that will produce a load lower than 4ohms, you'll be ok. That speaker cabinet is 8ohms, so just hook the head to the cab with a single speaker cable.

ok thanks. i had been concerned about hooking it up as the stuff is at my house but this helps a ton.

thanks!