gear wirering problem

[Ray Jr]

Hello all!

I'm shure some one can help me here with my rigs connection.

her's what i have
guitar wireless Audio technica
ZOOM G9.2TT
Behringer BTR2000 Tuner
Lexicon MX200 dual reverb effect processor
BBE Sonic Maximiser 482i
Blackstar serie one 200 head and two bottom (full stack)

I will like to have advise on how to connect everything to get the maximum quality sound.

right now im connected this way:

Guitar to wireless system to Behringer tuner to the zoom guitar input and the four cable methode to connect to my amp so 3 cables from the zoom to my head usint the input and the fx loop.

now i need to add the mx200 and the maximiser to it

can anyone help me?

Regards

[Razbo]

I don't know what half that stuff is lol :) Generally you keep your time- and phase-based effects in the loop, and everything else in front of the amp.

Depending on what you are doing, you can also put everything in front of the amp. It's a trade off you can consider and drop 20 or 40 feet from your cable runs.

If you put stuff in front, you still need to keep the time-based stuff at the end of the chain. (Normally, that is. Sometimes desired effects are achieved by not following a standard signal chain.)

Gates normally come last, but with delay effects, you don't want to be re-gating repeats, so put the gate before the delays.