PDA

View Full Version : Trouble with barre cords


Dre21
07-14-2008, 01:42 AM
Is there a way to make my strings a little closer to the neck so I don't have to apply so much force on the strings ?

ren
07-14-2008, 05:36 AM
Hi... what kind of guitar do you have?

What you're talking about is known as the 'action' - distance between the strings and the fretboard. You should e able to adjust it easily by lowering the bridge, but it depends on the type of guitar.

If you do lower it, you need to get a balance between getting it low enough to be comfortable, and high enough to avoid fret-buzz...

Dre21
07-19-2008, 04:53 AM
I'm so sorry I've got caught up at work and wife i forgot to check back in. I have a starter guitar..... Fender Strat Squire.

Kevin Taylor
07-19-2008, 05:55 AM
Hi... what kind of guitar do you have?

What you're talking about is known as the 'action' - distance between the strings and the fretboard. You should e able to adjust it easily by lowering the bridge, but it depends on the type of guitar.

If you do lower it, you need to get a balance between getting it low enough to be comfortable, and high enough to avoid fret-buzz...


Don't forget, once you do this you'll have to adjust the intonation as well.

sixpicker
07-20-2008, 03:24 AM
There's probably six movable saddles, with 2 small screws in the top of each one. This is where you'll adjust the action, and it may require a small allen wrench.

JD